Updating Printer Drivers Fujifilm

Fujifilm publishes PCL and PostScript drivers, model-specific packages and macOS support for Apeos devices. The regional support portals may list a device under its legacy Fuji Xerox name or its current Apeos name, and the driver version can differ. Use the exact model and region, and check the release notes for the controller generation. For office fleets, standardise the driver version and document finishing and authentication settings.

Revoria Press and production-class devices often need the controller’s driver plus a colour workflow, stock catalogue and RIP configuration. Driver updates should be coordinated with the production team and tested on a calibration job. On Apeos MFPs, scan-to-email, address books and user authentication live on the device. A new client queue will not recreate them, so back up or document the configuration before a clean install.

Use the model-specific Apeos driver for office devices and the controller-specific package for Revoria. Remove the old queue before changing driver families, reapply options and authentication, then test print and scan. Check whether the support page uses the legacy Fuji Xerox name.

1. 01

   Record the baseline and clear the old queue

   Note the exact model code, port, current driver version and any custom defaults. Remove the affected queue and, where relevant, its dedicated port. Restart before installing. This prevents Windows from silently reusing the stale driver.

2. 02

   Download the matching package from Fujifilm

   Select the exact model, Windows version and architecture. Verify the digital signature and release notes. If you need scan, fax, finishing or accounting features, confirm that the package includes those components rather than assuming they are bundled.

3. 03

   Install deliberately, not by automatic discovery

   Run the signed installer and add the printer on the intended port. For a network device, use a fixed address or DHCP reservation. If a generic queue already exists, remove it before adding the new one so the driver choice is unambiguous.

4. 04

   Reapply options and test real output

   Reselect installed trays, finishers, colour profiles and authentication settings. Print from two applications, test duplex and colour, then reboot and print again. If scanning is part of the workflow, test it separately.

Install the current Fujifilm macOS package for Apeos models. AirPrint may provide basic printing. Revoria production systems require the controller’s macOS driver and colour workflow. Confirm Apple silicon support before relying on an older package.

1. 01

   Remove the existing queue before downloading

   Open System Settings → Printers & Scanners and remove the device. This clears stale driver references and prevents macOS from quietly reusing a generic PostScript queue. Note any presets or custom paper sizes first.

2. 02

   Choose AirPrint or the vendor package on purpose

   If basic printing is enough, readding the device as an AirPrint queue is the most maintainable path. If you need scanning, specialty media, colour profiles or finishing, install the current Fujifilm package and select the vendor driver explicitly.

3. 03

   Verify scan support outside the print dialog

   Open Image Capture or the manufacturer’s scan utility and confirm the scanner is visible. A print queue can be healthy while scanning is absent. If the scanner is missing, fix discovery or the scan component before changing the print driver again.

4. 04

   Test, then record the working configuration

   Print a real document, a colour page and a duplex job where supported. Note the queue protocol, driver version and macOS release. macOS updates occasionally replace a vendor queue with a generic one, so the record is your baseline.

Selected Apeos devices may work with CUPS using PCL or PostScript. Production controllers usually require the vendor’s supported workflow. Validate colour and finishing before using Linux in a production path.

Linux support is model-dependent. Where the manufacturer does not publish a current package, a driverless queue or a validated generic PCL/PostScript driver may be the only supported option. Treat unsupported features as unavailable rather than “almost working.”

The three patterns below account for a disproportionate share of Fujifilm driver support cases. They are worth checking before you download another package.

This guide applies to the Fujifilm families below. Model suffixes and regional variants matter, so use the label on the device or the configuration page before choosing a package.

The list is illustrative, not exhaustive. A driver page may cover additional models or exclude older regional variants. Always compare the exact model and release notes before installing.