Updating Printer Drivers Kodak

Kodak’s consumer printer line included ESP all-in-ones, Hero models and EasyShare devices, while the Verité range served commercial photo and specialty printing. Driver availability depends on the model, region and current brand licensee. Some support pages provide only manuals or discontinued notices. Others still host an installer that predates Windows 11 and may fail signature or compatibility checks.

If an official package exists, keep a local copy and record its version, because archives disappear. If it does not, a signed generic PCL or PostScript driver may provide basic printing, but photo colour and media profiles will be limited. For a commercial Verité device, contact the current service organisation rather than experimenting with consumer installers. Document the exact controller and RIP version before making changes.

Current Windows may block an old Kodak installer. Do not disable security controls to force it. Check whether the package is signed and whether a compatibility-mode installation is explicitly documented. A generic PCL/PostScript queue can keep basic printing available while you decide on replacement.

1. 01

   Record the baseline and clear the old queue

   Note the exact model code, port, current driver version and any custom defaults. Remove the affected queue and, where relevant, its dedicated port. Restart before installing. This prevents Windows from silently reusing the stale driver.

2. 02

   Download the matching package from Kodak

   Select the exact model, Windows version and architecture. Verify the digital signature and release notes. If you need scan, fax, finishing or accounting features, confirm that the package includes those components rather than assuming they are bundled.

3. 03

   Install deliberately, not by automatic discovery

   Run the signed installer and add the printer on the intended port. For a network device, use a fixed address or DHCP reservation. If a generic queue already exists, remove it before adding the new one so the driver choice is unambiguous.

4. 04

   Reapply options and test real output

   Reselect installed trays, finishers, colour profiles and authentication settings. Print from two applications, test duplex and colour, then reboot and print again. If scanning is part of the workflow, test it separately.

Many Kodak photo printers predate current macOS. AirPrint may work on a few network models; most will need a legacy driver that no longer runs. If the device is still valuable, keep a compatible older Mac or use a dedicated print appliance rather than compromising the main machine.

1. 01

   Remove the existing queue before downloading

   Open System Settings → Printers & Scanners and remove the device. This clears stale driver references and prevents macOS from quietly reusing a generic PostScript queue. Note any presets or custom paper sizes first.

2. 02

   Choose AirPrint or the vendor package on purpose

   If basic printing is enough, readding the device as an AirPrint queue is the most maintainable path. If you need scanning, specialty media, colour profiles or finishing, install the current Kodak package and select the vendor driver explicitly.

3. 03

   Verify scan support outside the print dialog

   Open Image Capture or the manufacturer’s scan utility and confirm the scanner is visible. A print queue can be healthy while scanning is absent. If the scanner is missing, fix discovery or the scan component before changing the print driver again.

4. 04

   Test, then record the working configuration

   Print a real document, a colour page and a duplex job where supported. Note the queue protocol, driver version and macOS release. macOS updates occasionally replace a vendor queue with a generic one, so the record is your baseline.

Linux support is community-driven at best. Gutenprint may cover some photo printers, but expect limited colour and media controls. Verify the exact model in the Gutenprint supported-device list before investing time in a CUPS configuration.

Linux support is model-dependent. Where the manufacturer does not publish a current package, a driverless queue or a validated generic PCL/PostScript driver may be the only supported option. Treat unsupported features as unavailable rather than “almost working.”

The three patterns below account for a disproportionate share of Kodak driver support cases. They are worth checking before you download another package.

This guide applies to the Kodak families below. Model suffixes and regional variants matter, so use the label on the device or the configuration page before choosing a package.

The list is illustrative, not exhaustive. A driver page may cover additional models or exclude older regional variants. Always compare the exact model and release notes before installing.